Flange-clamped type, Prefill Type SVS,SVC - High-quality Flange-clamped type, Prefill Type SVS,SVC manufacturer from Taiwan | Camel Precision Co., Ltd.
CML, Camel Hydraulic, Camel Precision is a Taiwan based high-quality Flange-clamped type, Prefill Type SVS,SVC manufacturer and Flange-clamped type, Prefill Type SVS,SVC supplier With more than 40 years experience, CML is specialized in Vane Pump, internal gear pump, external gear pump, solenoid valve, modular valve, flow control valve, pressure control valve, check valve, servo system, power unit, hydraulic pump, hydraulic valve, hydraulic accessory manufacture. since 1981.
Flange-clamped type, Prefill Type SVS,SVC
SVS-32,SVC-32
Directional Control Valve,Hydraulic Valve, Relief Valve
The Flange-clamped type, Prefill Type full oil valve is a straight steel body with a maximum pressure of 400 bar, a maximum flow rate of 7000(LPM), and a pilot ratio between 3.6 and 4.3.
Pump Structure
- Industrial machinery.
- All kinds of specific hydraulic machinery.
Specification
| SVS | 100 | 10 |
|---|---|---|
| Model | Size | Design code |
| Steel Body SVS Ductile Iron SVC | SVS：32 to 200 SVC：32 to 125 | 10 |
Technical Data
| Type | Max. Pressure (bar) | Max. Flow (LPM) | Pressure Ratio | Flange Bolts | Pipe Size | Weight (kg) | |
|---|---|---|---|---|---|---|---|
| Number | Nor. Diameter | ||||||
| SVS-32-10 | 400 | 160 | 3.6 | 4 | M16 | 2B | 1.3 |
| SVS-50-10 | 400 | 3.8 | 6 | M16.M24* | 3B | 2.9 | |
| SVS-63-10 | 630 | 4.2 | 8 | M16.M24* | 3.5B/4B | 4.5 | |
| SVS-80-10 | 1000 | 4.3 | 8 | M16.M24* | 4B | 6.2 | |
| SVS-100-10 | 1600 | 4.3 | 8 | M22.M30* | 5B | 12.3 | |
| SVS-125-10 | 2500 | 4.3 | 12 | M24.M30* | 8B | 23.0 | |
| SVS-160-10 | 250 | 4000 | 4.2 | 16 | M30 | 10B | 55.0 |
| SVS-200-10 | 7000 | 4.1 | 20 | M30 | 12B | 85.0 | |
| SVC-32-10 | 250 | 160 | 3.6 | 4 | M16 | 2B | 1.3 |
| SVC-50-10 | 400 | 3.8 | 6 | M16 | 3B | 2.9 | |
| SVC-63-10 | 630 | 4.2 | 8 | M16 | 3.5B/4B | 4.5 | |
| SVC-80-10 | 1000 | 4.3 | 8 | M16 | 4B | 6.2 | |
| SVC-100-10 | 1600 | 4.3 | 8 | M22 | 5B | 12.3 | |
| SVC-125-10 | 2500 | 4.3 | 12 | M24 | 8B | 23.0 | |
Model No.
SVS-32,SVS-50,SVS-63,SVS-80,SVS-100,SVS-125,SVS-160,SVS-200
SVC-32,SVC-50,SVC-63,SVC-80,SVC-100,SVC-125
- Code
Model Code
- DWG
Measurement
Prefill Valves Pilot Port Adaptor
- Notice
Instruction
Pressure adjustment: When adjusting the pressure, loosen the lock nut and slowly turn the handle, clockwise for higher pressure, counterclockwise for lower pressure, don't forget to tighten the fixing nut after the adjustment.
Oil return type: The oil return pipe of the direct and remote control type should not be connected with the oil return pipe of other valves, but should be directly returned to the oil tank. If the internal capacity of the return line is too large, frequent vibration is likely to occur. Therefore, the length and diameter of the piping should be reduced as much as possible.
Flow rate selection: When the flow rate is small, the adjustment pressure will be unstable. Therefore, when using caliber 03 and 06, the flow rate should be greater than 5 L/min, and when using caliber 10, the flow rate should be greater than 8 L/min.
- Download
SPF_STF Flange-clamped type, Prefill Type conventional valve
SPF_STF conventional valve model code, features, applications, technical data,performance curve and product feature.
Download
Popular Products
Download 
CML, Camel Hydraulic, Camel Precision Flange-clamped type, Prefill Type SVS,SVC Service Introduction
Located in Taiwan since 1981, Camel Precision Co., Ltd. is a Flange-clamped type, Prefill Type SVS,SVC supplier and manufacturer in Machinery and Equipment Manufacturing Industry.
In 1981 Camel Precision Co.,Ltd was founded. The management of company fully awards of high quality products requires not only sophisticate machinery, But good knowledge in technology is also important as well. Company invited senior engineers from Germany and Japan to lead the manufacturing and training of local engineers in hydraulic industry. We offer our customers industrial pumps, solenoid directional control valves, hydraulic pumps, vane pumps, external gear pump, internal gear pump, directional valve, hydraulic valves...etc.
CML, Camel Hydraulic, Camel Precision has been offering customers high-quality Flange-clamped type, Prefill Type SVS,SVC production service, both with advanced technology and 38 years of experience, CML, Camel Hydraulic, Camel Precision ensures each customer's demands are met.
CML Brand Story
Enthusiasm catalyzes dreams; Energy promotes industry and drives continuous progress in the world.
Customer Service
With the rich product range, years of experience CML can provide integrated solutions to achieve customers' benefits.
Global Network
CML serving customers all over the world through local agents and prompt air and sea freight deliveries.